THE ULTIMATE OFF GRID CAMPERVAN HOT WATER SYSTEM!
The Bobil Air Hybrid heats allows you to heat water from both your diesel air heater and via electric (12V, 230V or both). By pumping water through a heat exchanger - attached to a diesel heater - you can heat up water from your diesel heater, giving your hot water to wash, do dishes or have a hot shower. The 10L insulated, pressurised tank easily connects to your existing water supply and has integrated tank connectors, require very little power to maintain the temperature.
This system now comes with our new Bobil Smart Controller, which automatically diverts air towards and away from the heat exchanger depending on whether you wish to heat your campervan, or hot water, or both. This also controls the 12V element, allowing excess solar to automatically power the element when your batteries are full, for FREE HOT WATER!
This controller has inputs for level sensors too, for a complete campervan plumbing system. To choose the right size, measure the depth on your fresh water tank, and choose the size slightly smaller than this depth. (e.g. Tank depth: 330mm, get the 300mm). Waste water level sensor is included with the fresh water sensor.
Suitable for all water pumps up to 20PSI, and comes with ½” F BSP fittings wto connect to your plumbing system. We recommend the 20PSI Shurflo trail king 7, available to purchase here if you don't currently have a water pump. Any system over 20PSI will require an external pressure switch to drop the pressure.
For extra safety, you can also add our thermostatic mixer valve kit to provide safe warm water directly from your taps without needing a mixer, excellent if you have kids in the van!
Key Features:
Easy to install.
Flexible hose means no need for an accumulator, saving money and complexity.
Common threaded fittings make it easy to plumb into your system.
Adjustable temperature.
Easy to program controllers display water temperature and switches the circulation pump on when heat from the air heater is detected.
Thick polyurethane foam maintains water temperature and reduces electricity consumption.
Diverter included to divert hot air away from the water heater when van heating is required, automatically controlled with the Bobil Smart Controller.
Includes drain valves for both water tank and heat exchangers.
Kit Contains
Bobil Hybrid Tank (10L)
Dual Heat Exchanger + Adaptors (60, 75, or 90mm)
Bobil Smart Controller
Circulation pump + Silicone Hose
All needed fittings, barbs, splitters, hose clamps
Drain Kit
The Bobil Smart requires certain software for your heater type. Please enter your diesel/LPG/petrol heater make and model into the box provided.
If you're unsure which water heater to choose, you can watch this video to help you decide which one is best for your needs.
Or watch this assembly video to help with your install. Click here
This system is supplied with bare wires. This product is CE marked. It complies with the requirements of the European health, safety and environmental protection legislations.
Bobil Air Hybrid
Capacity 10 litres Maximum pump pressure 20 PSI Power 200W (DC), 800W (AC), 2200W (Diesel) Pump and controller power consumption 2 amps in operation. 0.3 amps in standby. Electric heating time 15 to 60 degrees AC: 40 minutes; DC: 145 minutes, 4kW Diesel heating time 15 to 60 degrees 15 minutes 2kW Diesel heating time 15 to 60 degrees 30 minutes Tank dimensions 430 L x 270 W x 280 H (mm) Heat exchanger dimensions (with adaptors) 240 L x 120 W x 220 H (mm) Shorter with 75 and 90mm ducting size.